 |
|
Definitions which are retained for compatibility. More...
Go to the source code of this file.
Data Structures | |
| struct | tagCanHWDescr |
| struct | tagCanSWDescr |
| struct | canSWDescriptorEx |
Macros | |
| #define | canCIRCUIT_ANY -1 |
| Any circuit will do. More... | |
| #define | canCARD_ANY -1 |
| Any card will do. More... | |
| #define | canCHANNEL_ANY -1 |
| Any channel will do. More... | |
| #define | CANID_METAMSG (-1L) |
| Like msgs containing bus status changes. More... | |
| #define | CANID_WILDCARD (-2L) |
| We don't care or don't know. More... | |
| #define | canSTAT_INACTIVE canSTAT_RESERVED_1 |
| The circuit is not active (removed from the sw bus) More... | |
Some obsolete codes; they are not used nowadays. | |
| |
| #define | canERR_BUFOFL canERR_RESERVED_3 |
| "Buffer overflow" More... | |
| #define | canERR_REINIT canERR_RESERVED_4 |
| "Reinitialization failed" More... | |
| #define | canERR_MSGLOST canERR_RESERVED_5 |
| "Message lost by CAN-chip" More... | |
| #define | canERR_OVERRUN canERR_RESERVED_6 |
| "Receive buffer overrun" More... | |
| #define | canERR_CARDCOMMFAILED canERR_RESERVED_7 |
| "Can't communicate with the card" More... | |
Circuit status flags, retained for compatibility | |
| |
| #define | canCIRCSTAT_ERROR_PASSIVE 0x0001 |
| Error passive. More... | |
| #define | canCIRCSTAT_BUS_OFF 0x0002 |
| Bus off. More... | |
| #define | canCIRCSTAT_ERROR_WARNING 0x0004 |
| Error counter > 96. More... | |
retained for compatibility | |
| |
| #define | canCHANNEL_CAP_DIAGNOSTICS 0x10000000L |
| Obsolete, use canCHANNEL_CAP_CANTEGRITY instead. More... | |
| #define | canCHANNEL_CAP_CAN_DIAGNOSTICS canCHANNEL_CAP_RESERVED_2 |
| Obsolete, can report CAN diagnostics. Only used by LAPcan driver. More... | |
| #define | canCHANNEL_CAP_REMOTE canCHANNEL_CAP_RESERVED_1 |
| Obsolete, use canCHANNEL_CAP_REMOTE_ACCESS or canCHANNELDATA_IS_REMOTE. More... | |
Sticky status flags | |
| |
| #define | canSTICKY_ACK_ERROR 0x80000801 |
| #define | canSTICKY_FORM_ERROR 0x80000002 |
| #define | canSTICKY_STUFF_ERROR 0x80000004 |
| #define | canSTICKY_CRC_ERROR 0x80000008 |
| #define | canSTICKY_BIT0_ERROR 0x80000010 |
| #define | canSTICKY_BIT1_ERROR 0x80000020 |
| #define | canSTICKY_HW_OVERRUN 0x80000040 |
| #define | canSTICKY_SW_OVERRUN 0x80000080 |
Flags for canOpen | |
| |
| #define | canWANT_ACTIONS 0x01 |
| #define | canWANT_OWN_BUFFERS 0x02 |
| #define | canWANT_ERROR_COUNTERS 0x04 |
| #define | canWANT_EXCLUSIVE 0x08 |
| #define | canWANT_EXTENDED 0x10 |
| #define | canWANT_VIRTUAL 0x20 |
Circuit types. | |
| |
| #define | PCCAN_PHILIPS 1 |
| 82C200 on PCCAN 1.0 More... | |
| #define | PCCAN_INTEL526 2 |
| Not supported. More... | |
| #define | PCCAN_INTEL527 3 |
| 82527 on PCCAN 1.0 More... | |
| #define | CANCARD_NEC72005 4 |
| NEC72005 on CANCard. More... | |
| #define | CIRC_VIRTUAL 5 |
| #define | CIRC_SJA1000 6 |
Card types. | |
| |
| #define | canCARD_PCCAN 1 |
| PCCAN ver 1.x (KVASER) More... | |
| #define | canCARD_CANCARD 2 |
| CANCard (Softing) More... | |
| #define | canCARD_AC2 3 |
| CAN-AC2 (Softing) More... | |
| #define | canCARD_LAPCAN 4 |
| #define | canCARD_ISACAN 5 |
| #define | canCARD_PCCAN_OEM 6 |
| Special for OEM PCcan cards. More... | |
The canFlgXXX are left for compatibility. | |
| |
| #define | canFlgACCEPT 1 |
| #define | canFlgREJECT 2 |
| #define | canFlgCODE 3 |
| #define | canFlgMASK 4 |
Flags for action routines | |
| |
| #define | canDISCARD_MESSAGE 3 |
| #define | canRETAIN_MESSAGE 4 |
For busParams - sync on rising edge only or both rising and falling edge | |
(Not supported)
| |
| #define | canSLOW_MODE 0x01 |
| Sync on rising and falling edge. More... | |
CAN driver types; these constants are retained for compatibility. | |
(Not supported)
| |
| #define | canOFF 0 |
| #define | canTRISTATE 1 |
| #define | canPULLUP 2 |
| #define | canPULLDOWN 3 |
| #define | canPUSHPULL 4 |
| This is the usual setting. More... | |
| #define | canINVPULLUP 5 |
| #define | canINVPULLDOWN 6 |
| #define | canINVPUSHPULL 7 |
These were never implemented. | |
(Not supported)
| |
| #define | canIOCTL_LOCAL_ECHO_ON 3 |
| #define | canIOCTL_LOCAL_ECHO_OFF 4 |
| #define | canMSG_STATUS 0x0008 |
Typedefs | |
| typedef void *(* | canMemoryAllocator) (size_t size) |
| typedef void(* | canMemoryDeallocator) (void *p) |
| typedef struct tagCanHWDescr | canHWDescr |
| typedef struct tagCanSWDescr | canSWDescr |
Functions | |
| canStatus | canLocateHardware (void) |
| int | canOpen (const canHWDescr *const hwdescr, const canSWDescr *const swdescr, const unsigned int flags) |
| canStatus | canGetCircuits (int *context, char *name, char *vendor, char *version, unsigned int *cardtype, unsigned int *circtype, unsigned int *channel) |
| canStatus | canInstallAction (int handle, long id, int(*fn)()) |
| canStatus | canUninstallAction (int handle, long id) |
| canStatus | canInstallOwnBuffer (int handle, long id, unsigned int len, void *buf) |
| canStatus | canUninstallOwnBuffer (int handle, long id) |
Definitions which are retained for compatibility.